The contributor's code (render/spine.js syncFormPose, the render/units.js wiring and FORMS entry, the headless
test/render/forms.test.js block), applied from PR #365, so they are the author of this commit. Maintainer side: the
hard-coded Spine id became a STEALTH_FORMS table (form while the stealth bit is off), comments and docs/ASSETS.md
reworded. Not ported: the PR's sim targeting rewrite (content/enemies/invisible.js), its enemies_bosses tests, its
roster.json and the Chrome suite (forms.browser.test.js, not run here).
Seen (#296, FrogThai): a blocked 骨刺 kept the snake. The sim already sends UF.STEALTH only while its 隐匿 is effective
(not blocked, not revealed — targeting.js enemyStealthed); the view now keys the FORMS 'revealed' clip set (Idle_B /
Move_B / Die_B / Attack_B, all in the skeleton) off that bit in UnitView.sync — before a DIE of the same snapshot — and
re-poses at once: a running attack continues in the other attack clip at the same point relative to its strike frame
(Attack_A hit 0.533 s, Attack_B 0.733 s; a pending wind-up still strikes on time), a stun / idle restarts on the new set
without a crossfade, and a frozen skeleton is posed with update(0); a model loaded later is posed the same way.
Golden: unchanged (render only).
Seen (reproduced on the parent, notes repro-354.mjs): band_orchid's active refresh copies the top-tier operator into another
slot and freezes the copy (bands/meta.js band_shop_refresh_copy_max_lv_char, slot.frozen = true) while shop.frozen — the
toggle — stays false; m.private sends both (views.js: shop.frozen and slots[i].frozen). The shop bar passed the toggle
(`frozen = !!shop.frozen`) to every ChessCard / ItemCard, so no card showed the frost: the server kept the card to the next
prep, the player could not see which one.
Now: shopBar.js slotFrozen(slot, toggle) = the slot's own flag, or the toggle (a frame without per-slot flags — the dev
mock — and the old behaviour for the 冻结 button, which still copies the toggle onto every unsold slot); both card kinds
use it. The bar's frame (is-frozen) and the 冻结 / 解冻 button stay on the toggle. The rule is not touched (bands.test.js,
and the new test): a second manual refresh re-rolls the frozen card too — like the toggle, "再手动刷新会重抽" — and
freezes one of the new pair; with no further refresh the frozen card stays in the next prep (the flags are cleared
then, round.js startRound).
- Tests: test/ui/feedback7-orchid-freeze.test.js (4: the wire — exactly one frozen card of the pair, toggle off — and the
cards drawn from it; the toggle still freezes every slot; the rule unchanged across two refreshes and a round; the
ShopBar source pin); fails on the parent (no slotFrozen, the cards passed `frozen`).
- Docs: PLAYING.md (冻结 row), design/network.md (m.private slot.frozen). Golden: unchanged (client render only).
Applied unchanged after review (Grok static review: MERGE; the diff read in full: no network, no dependency).
UnitView._updateImpostor refreshed a unit when (frame + phase) % interval === 0 with a random phase per unit, so the
refreshes of a frame were binomial: reproduced on the parent with 7 pen figures at interval 3 — 5 1 1 5 1 1 … and
2 4 1 2 4 1 … refreshes per frame instead of 2 / 3. Now render/app.js hands every impostor unit the next slot of the frame
(ctx.impostorSlot, a counter reset in frameBody), the unit refreshes when (frame + slot) % interval === 0, and a unit
whose slot keeps moving with the frame (the units before it culled on and off in step) is still refreshed after 2
intervals (imp.last); a context without slots keeps the random phase. Each unit's rate and the total work are unchanged;
no sim or pixel-as-state change.
Step 2 of #327 (a time budget by priority) is not part of this and still needs a decision.
- Tests: test/render/unitview.test.js 'impostor refresh slots' (3: slots in update order — fails on the parent, the
starvation cap, the no-slots context); unit view / render suites unchanged.
- Docs: design/client.md. Golden: unchanged (client only).
Seen (Grok's review, reproduced here with the real sim): the sim's deploy emits a deployment-activated skill's
['skill', id, 1] before the unit's ['spawn', unitInfo] (宴: three events earlier) and audio.js dropped a skill event of an
unknown unit, so that one cast made no sound while every later one did.
- audio.js: pendingSkill — a 'skill' ON for an unknown unit is held (one per unit, 64 at most, the oldest go first);
_track plays it once when the unit's spawn arrives; a skill OFF is no cast and is not held; setFieldUnits drops the holds.
Changed from the PR: setFieldUnits clears the holds BEFORE it tracks the new field's units (the PR cleared after, so a hold
left over from the previous field would have sounded for a unit of the new field that shares its id — ids are per battle).
- screens/game.js: NOT the PR's change. The pre-entry buffer (keepEarly: every spawn, die, deploy, status and skill since the
field's m.field, up to 1500 of them) is handed to the sound as its 'spawn' tuples only (new early.js audioEarly): the whole
list would play every old death, deploy line and cast at once on entering. The live path (onEv) already forwards the full
list, so the hold alone fixes the live silent first cast; a deploy-tick cast that falls into the short pre-entry gap
stays unheard (a deliberate gap — replaying "only the casts before their spawn" would still sound a minute-old cast when a
field was buffered while another one was on screen).
- Tests: test/ui/audio.test.js (3: the held cast in one batch and across batches, once, no hold for a skill OFF; a hold does
not outlive its field and is bounded; 宴's real deploy: the sim's cast comes before the spawn and sounds exactly once — all
fail on the parent) and test/match/feedback1-runner-forms.test.js (the audio gets the spawn tuples only: silent replay that
still teaches the units, the next live cast sounds; the whole list would have sounded old cues). Docs: design/client.md.
- Golden: unchanged (client audio only).
Applied unchanged after review (Grok static review: MERGE; the diff read in full: no network, no new dependency, no
shipped eval). The leak was real on feedback7: mountFieldView raced createFieldView against a timeout and, on failure,
removed every child of the host while the factory kept running — Pixi finished later and appended its canvas over the
simplified view (taking its clicks); the host wipe could also delete a newer view mounted by the same hook.
- ui/fieldHost.js: mountFieldView(host, { signal }) owns an AbortController; the timeout, a failed import or an invalid
view aborts it, a view a factory returns after that is destroyed, an outer abort (useFieldView's cleanup) rejects
without a fallback; nothing clears the host's children any more.
- render/app.js createFieldView takes the signal: the Pixi load / manifest / font waits end on abort, the synchronous
build registers its disposables (setupCleanup) so a throw releases the app, tiles, fx, impostors, listeners and
observers it made, the board-art and 3D-board waits moved after the view exists (aborting them is view.destroy(),
idempotent), destroy() also removes the canvas. render/app/host.js withTimeout(p, ms, signal).
- Tests: test/ui/fieldHost-lifecycle.test.js (5, node vm, fake timers: all fail on the parent) and the opt-in real-browser
test/render/initialization.browser.test.js (6 scenarios in headless Chrome, 5 fail on the parent: a late Pixi load
covering the fallback — with a factory that honours the signal and one that ignores it —, art timeout, a setup
exception, an unmount racing a newer mount); test/ui/playtest2.test.js's source pin takes the new indentation.
fieldview / browser suites in Chrome unchanged (the two 4× throttled fps tests flake when two Chrome files run
at once, pass alone).
- The createFieldView body stays unindented inside its new try (the PR's choice, to keep the diff reviewable).
- Docs: design/client.md §9. Golden: unchanged (client lifecycle only).
The three PRs patched the same snapshot and HUD lines (Grok's review: do not merge three diffs), so this is one design
built from their code and tests; IceCodeNew is the commit author (#303, #378), Convey123 co-author (#383).
- b.snap gains three optional, display-only lists beside the unchanged 9-field tuples (snapshot.js ammoView / wolfView /
negView, called from battle/events.js snapshot(); a living, deployed, visible ally, only when it has one):
ammo [[id, rounds left, magazine]] (whole rounds; the magazine is the activation's real total that unitTuple's SP
fraction runs on, extras and refills included), wolves [[id, 狼影 left, talent maximum]] (mem.shadows of the new
mem.wolfCapacity, set by tokens.js wolfPack and the managed vigil kit), neg [[id, fill]] (unit.negFill(), a function
op-hsgma2.js sets: the pool is read when the snapshot is taken, no per-tick sync). UnitInfo.ammoSkill (an ally whose
skill is an ammo magazine) is known from the first appearance: fx events run before the frame's sample, so the aura
cannot wait for the first ammo row.
- render/interp.js keeps the lists per snapshot (malformed rows / unknown ids dropped) and sample() hands them out from the
older snapshot like flags (they step with the skill flag); render/units.js draws them: the ammo magazine replaces the
SP bar (a cell per round, thin cuts, exact fill, no cuts under 2 px a cell), a row of diamonds under the bars for the
wolves (the element gauge row moves below), the red bar over the drained HP bar for the pool. An ammo skill draws no
standing aura (rings.js _aura; the activation burst stays).
- PR #378's wolf-head avatars are NOT taken: the count is data (the talent text 至多3只, mem.shadows), the HUD art of the
official counter is in no game data we have, so the pips are plain diamonds [ASSUMED look]. The PRs' own tests are
folded in and extended (test/sim/hud-readouts.test.js, test/render/hud-readouts.test.js, op_hsgma2.test.js).
- Docs: network.md, SIM.md §9, client.md, PLAYING.md, types/core.js.
- Golden: unchanged (283 scenarios; the canon hashes units / down / elem only, no sim state moved).
- Tests: 4 + 14 new + 1 in op_hsgma2 (12), all fail on the parent; 344 related tests pass; lint 0 errors, typecheck,
check:imports, docs tests.
Co-authored-by: Convey123 <Convey123@users.noreply.github.com>
SpineActor.attack() starts an attack that was not wound up (no look-ahead: a batch that arrived late) on its strike
frame — right for a quick rhythm, but for a slow clip-per-attack enemy the wind-up was cut out: 重犯 (Attack_grey
2.333 s, strike at 1.0 s, attacks every 3 s) showed the slam without the ball ever rising, and only 1.33 s of the clip.
The owner's decision of 2026-10-07 on #246: re-implement on the current spine.js so that, when the attack interval
leaves room for the whole clip, it plays once completely from the start. A clip-per-attack actor (enemies) with
interval ≥ the clip now plays it from 0 at its own speed for the whole clip, the strike landing a little late; a
quicker rhythm keeps the strike-frame start, and operators' looping attacks are unchanged (the PR's condition had it
the other way round: it changed the looping attacks and left out the clip-per-attack enemies it was written for).
Tests: test/render/feedback2-enemy-attack-clip.test.js (+1: 重犯 plays the whole clip from its wind-up, a quicker rhythm
and an operator start on the strike frame) 5/5; render eyemask, unitview, texas skill clip, skill idle 51/51.
The eyelids of 佩佩, 仇白, 隐德来希, 琳琅诗怀雅 and other models are Spine clipping attachments: the polygon is the eye's
opening and the eyeball / eye-white meshes drawn after it are clipped to it, so a blink or a knock-down closes the eye
through the mask. render/app.js pickClipping keeps the masks only for a lone clipped skeleton at high quality, so in a
battle the eyeballs showed through the closed lids. SpineActor._eyeMaskFallback now runs after each update while the
masks are off: it walks the draw order like pixi-spine (from a slot whose attachment in force is a clip, to its
endSlot — any skin) and hides the slot container of a covered slot whose drawn centre (a mesh's mean vertex, a region's
quad centre) lies outside the clip polygon [ASSUMED: all or nothing per slot]; turning the masks on shows them again.
PR #384's version hid `slot.currentSprite`, which pixi-spine leaves null on a mesh slot — every covered slot of the
417 local operator skeletons' 73 clipped ones is a mesh (313) or a region (54; regions have no worldVerticesLength, so
it never measured them) — and its test stubbed a currentSprite onto every slot, so nothing was hidden in the game. Kept
from it: the diagnosis, the ray-casting pointInPolygon and the key-frame expectations.
Tests: test/render/eyemask.test.js (new, 7, on real runtime objects — the official skeletons in @pixi-spine/runtime-3.8's
real Spine, @pixi/core display objects with a 16 px canvas stand-in, the real SpineActor: the eyeballs are meshes in
the clip's container; 佩佩 / 仇白 Die and 隐德来希 / 琳琅诗怀雅 Idle hide exactly the eye slots in the closed frames and
nothing open; a 30 Hz sweep of six clips; masks on hide nothing, turning them on shows all) 7/7 — the five skeleton tests
skip without public/assets (not committed; npm run assets), and fail on PR #384's code; render unitview, enemy attack
clips, texas skill clip 45/45.
The owner reported 「琳琅诗怀雅的2技能的香槟会掉血，会被治疗」. Allies always draw an HP bar (render/units.js
_updateHud), so the bomb's every HP change showed. PRTS 香槟炸弹 (实体类型 装置, 1000 HP) says no HP bar is shown even
below full HP; nothing there makes it invulnerable or unhealable. Its bar is now hidden at any HP (NO_HP_BAR). Its HP,
the damage it takes (活性源石 hurts what stands on it — 70 true damage a second) and healing are left as they are: no
invulnerability added; whether it should be unhealable is the owner's decision (no written source says so).
Tests: test/render/champagne-hpbar.test.js (new, 2: no bar at full HP, hurt or healed; another summon keeps its bar)
2/2; render/unitview 35/35.
- tools/assets/plan.mjs: one voiceTree() per dub — audio.voice (--voice-lang, cn by default) and audio.voiceJp
(VOICE_JP_LANG, always the JP dub, audio/voice/jp/<charId>/cn_nnn.mp3); fetch-assets plans and downloads both
(stats.voiceJpChars), so setup (checkAssets walks every listed URL) fetches both too.
- data/assets.json regenerated with the project's tool (node tools/fetch-assets.mjs --add-only, raw.githubusercontent.com,
107 s): the only change is audio.voiceJp + stats (+2674 files, +89,388,041 bytes, voiceJpChars 191) + hash — the rest
is byte-identical; the JP tree is the Chinese one with the folder swapped (191 × 14 files, every file a valid MP3).
The audio files are not committed (public/assets/ is git-ignored).
- public/js/audio.js voiceLine(): 'jp' draws from voiceJp and falls back to the Chinese line per slot (a JP entry the
manifest lacks) and per line at play time (the Chinese file of the same name when the host lacks the JP one —
same token, same gate); operators without voice (stand-ins, 盟约·辅助干员, summons) stay silent. setVoiceLang().
- settings: voiceLang 'cn' | 'jp' (VOICE_LANGS, sanitizeSettings), the 语音语言 row under 干员语音 (each dub named in
its own language, like the language switch), 语音语言 in the en / ja / ko / zh-TW packs.
- tools/package.mjs FULL_ZIP_JP_VOICE (true): false holds the JP files out of the full zip (and its update zip) —
not missing, not orphans, never in an update's `removed`; setup then downloads them.
- Sizes measured: art download 548 MiB (was 463), full zip ≈ 505 MB (0.2.1: 428 MiB + 76 MiB of zipped JP voice),
unzipped 711 MB (package --dry-run); lite zip unchanged. README, DEPLOY, ASSETS, setup's fallback size updated;
PLAYING voice paragraph; §21.30 "Changed in 0.2.2" note.
Tests: test/feedback7-voices.test.js (new: plan, manifest, settings, package switch), test/ui/audio.test.js (voiceLine,
the manager's dub choice and fallback), test/ui/gameLogic.test.js, test/docs-consistency.test.js — all fail on the parent.
The sim displaces at once (battle/displacement.js), so the snapshots only show the destination: a ≤ 2.5-tile push was
lerped over one snapshot interval (3 frames, 0.58 tiles in one frame — frame-loop repro over a real battle), a longer
pull snapped. render/app.js now starts UnitView.slideTo as soon as the interval it samples ends on the snapshot that
carries the destination (a `displace` fx still queued up to SnapshotBuffer.nextSnapT); the view holds where it stood
until that snapshot is shown, then eases into the sampled position under a constant deceleration (v0 = 2D/T, a = v0/T,
T = 0.14·√D in 0.12–0.45 s — ours, [ASSUMED]: no source gives the official timing; docs/research/13 has the official
impulse-and-friction classes). A unit that dies on the way finishes the slide and lies where the push put it.
Death: DIE_CLIP_MAX 1.6 → 8 s (data/assets.json: 234 enemy Die clips, the longest 7.97 s, 25 over 1.6 s), and a
flyer holds FLY_HOVER until the fade tail (DIE_FADE_TAIL 0.55 s).
Substantially @xcdoge's code (PR #380: the slide, the death timing, research 13 / 14, most tests), authored as theirs.
Changed on review: the corpse no longer goes back to where it stood (the PR's test asserted that; the sim's body is at
the destination); the PR's pre-pass scanned (renderT − 0.5, renderT] after processEvents had taken those events, so
it never fired and the slide started a frame before landing — it now looks ahead to the next snapshot and holds the
view until then; the slide eases into the live sample instead of the fixed destination (no jump back onto an enemy
that walked on); each step uses its mean velocity (the end-of-step speed ran 9 % short, then jumped); the constants'
comments say the timing is ours; research 14 no longer cites a sweep script and a data guard that were not in the PR.
Golden: unchanged (client only).
Tests: test/render/unitview.test.js 35/35 (slide: deceleration, idempotence, facing, snapshots in flight, friction,
√D, corpse lies where pushed, hold-then-ease without a landing jump, a never-shown slide handed back; the app.js frame
order over a real battle: a 1.7-tile push over ≥ 8 frames with every step < 0.35 tiles, a push-kill's body staying at
the destination; death: a dying flyer's lift, every Die clip within DIE_CLIP_MAX and a 7.97 s clip scheduled whole);
test/sim/displace-fx.test.js 1/1; render/interp 16/16; docs tests pass.
Since 0.2.0 the sim stands an unblocked enemy for the rest of its attack clip (ai.js attackStand → atkStandUntil),
but render/interp.js lerped x/y over the whole snapshot gap, so the view slid through a recovery the sim held
(repro: a real 隐形弩手, snapshots 4.9 / 5.0, stand until 4.934 — sampled at 4.917 it slid at vx −0.2).
The snapshot now carries, only when non-empty, `stand: [[id, until]]` (atkStandUntil of enemies alive, deployed,
visible, neither feared nor stunned) and `standCut: [[id, at]]` (the latest time each listed enemy's recovery was cut
or ignored: a displacement, fear, a stun, hiding, leaving — Battle._cutAttackStand, display metadata the battle never
reads). sample() holds the older position until `until` and interpolates the rest (HP / SP keep the whole interval),
stays linear when the newer snapshot records a cut inside the interval, and extrapolates nothing for a newest snapshot
that shows a stand, a death, a stun or a block. Teleports and redeploys still snap first; old snapshots without the
fields interpolate as before.
Substantially @ZiyueW1116's code (PR #381), authored as theirs. Changed on review: the docs (SIM §9, design/network.md)
and code comments in English like the rest of them; the snapshot builds its listed-id set only when an enemy has a cut
to report.
Golden: unchanged — the digest canon hashes neither field and the sim's timing does not move (all 283 scenarios match).
Tests: test/render/attack-recovery-interp.test.js (new, 25: metadata validation, hold-then-slide, cuts, legacy
snapshots, extrapolation guards, real 隐形弩手 / Weedy push-kill / stun / freeze / sleep / levitate / block / fear
battles) 25/25; render/interp 16/16; sim battle, perf, robustness, downelem 69/69.
screens/game.js passes the detail panel voice=${true} instead of its combat flag, so the panel's existing
audio.voice(charId, 'select') runs on every opened operator: a piece on the field or in the hand, a shop /
reward card, a bond member. The gate follows the official FOCUS_CHAR row (audio_data.json battleVoice:
priority 10, cooldown 0, overlapIfSamePriority true): VOICE_TAP_SLOTS — on an idle channel a tap always
plays (no 1.2 s global gap; VOICE_COOLDOWN_MS.select 1500 → 0), a newer tap replaces the 选中 line on air,
and a higher-priority line (部署 20, 作战中 70, 开战 100 …) is never interrupted. Deploy / skill / engage /
result lines stay battle-only; stand-ins, 盟约·辅助干员 and summons stay silent (no voice entry).
Tests: test/ui/audio.test.js (new: the gate and two taps through the manager; fails on the parent),
test/docs-consistency.test.js pins updated. Docs: §21.30 "Changed in 0.2.2" note, PLAYING.md voice paragraph.
The 赤霄·天喟 wave is a kit-managed probe (it turns corners and lives as long as the skill), not a snapshot
projectile, and the sim emitted one `dash` at the cast and a `slash` per hit — nothing along the way, so the client
drew no wave. op-chen3.js now emits fx('chen3Wave', { x, y, fromX, fromY, dr, dc, id }) every WAVE_FX_EVERY (0.12 s;
4 ticks), the trail restarting at a corner; render/fx registers chen3Wave → 'qi' (pt: drawn at the event, never on
her) and draws a streak plus a crescent head turned the way it travels. The look is a procedural stand-in, not the
official particle prefab.
Substantially @Convey123's code (PR #382), authored as theirs. Changed on review: the head is projected after
streak() — streak() reuses the effect system's projection scratch, so the PR drew the crescent on the trail's start,
one event behind the wave — and the trail, head and heading share one height; an unused test variable dropped.
Golden: diy-073 (5_diy*=chen3 S3 in two slots) events.fx 508 → 1558, fx.chen3Wave → 1050; diy-074 (6_diy*=chen3 S3)
events.fx 272 → 872, fx.chen3Wave → 600. HP, kills, damage, hooks and snapshot hashes unchanged: battle.fx only
records an event.
Tests: test/content/op_chen3.test.js (+1: the events, their cadence, id, direction, trail start, silence after the
skill) 12/12; test/render/fxchen3wave.test.js (new, 6: the archetype, drawn at the wave not at her, the head on the
wave and turned with it, a sweep joining into one trail, junk input, nothing left after) 6/6; boardart 15/15.
Applied as-is. Captured real battles live in public/dev/perf (including the round-13 联防 on the wide round battlefield), with a browser speed page and a headless benchmark. public/dev stays out of the package. The Chrome benchmark was not run. The numbers in the original pull request are from 0.1.4 and are not quoted here.
Tests: node --test test/perfbench.test.js test/render/battle-perf.browser.test.js — 13 pass, 0 fail; the Chrome suite skipped (RENDER_E2E unset).
Applied as-is. The client precheck for withdrawing a board operator onto an occupied hand slot now treats that operator's own hand summon stack as a free slot, which the server already accepted. Temp stacks, board summons, another player's tokens, and an item that only carries ownerUid stay HAND_FULL. stack.count is not extra slots. Dropping on a chess still checks the swap first.
Tests: node --test test/ui/gameLogic.test.js test/ui/facing.test.js test/ui/uiFixes.test.js test/match/feedback1-placement.test.js test/match/feedback5-we2-placement.test.js — 116 pass, 0 fail. Before this commit: npm run -s lint — 0 errors (134 existing warnings); npm run -s typecheck — pass; npm run -s check:imports — pass; node --test test/docs-consistency.test.js test/docs-paths.test.js test/version.test.js test/package.test.js — 47 pass, 0 fail. No new UI strings, so the i18n check was not run. No golden update.
Applied as-is. The replace dialog no longer treats Enter that started on a button as confirm. Enter or Space on 取消 closes the dialog and leaves the chosen equipment in place. Enter on an option only changes the selection. Enter on the confirm button still sends g.equip with that replaceUid. This matches the guard already used by DialogHost.
Tests: node --test test/ui/mock.e2e.test.js test/ui/leftovers.test.js test/ui/standin-ui.test.js — 31 pass, 0 fail. The mock e2e suite skipped because SP_E2E is unset. eslint on the touched files: 0 errors (one pre-existing unused-assignment warning in mock.e2e.test.js).
Applied as-is. The shop bar's two-tap arm for the level button is now lv:<level>. A successful upgrade, including the D shortcut, changes the level and drops that arm, so the next click only selects the new level. A freeze at the same level keeps the confirm. Another card's arm is left alone, and D still upgrades immediately.
Tests: node --test test/ui/mock.e2e.test.js test/ui/playtest6-elite.test.js test/ui/playtest6-ui.test.js — 20 pass, 0 fail. The mock e2e suite skipped because SP_E2E is unset. eslint on the touched files: 0 errors (one pre-existing unused-assignment warning in mock.e2e.test.js).
Applied as-is. The shared Modal keeps Tab inside the topmost dialog, pulls focus back if it leaves, skips disabled, hidden, inert and zero-size controls, and does not trap while a .guide overlay is open. Escape still closes the dialog. Enter is unchanged, so a focused button keeps its native click.
Tests: node --test test/ui/modal.e2e.test.js test/ui/loadout.e2e.test.js test/ui/leftovers.test.js test/ui/match-info.test.js test/ui/loadout.test.js test/ui/playtest3.test.js test/ui/playtest4.test.js test/ui/uiFixes.test.js test/ui/localArt.test.js — 114 pass, 0 fail. The modal and loadout e2e suites skipped because SP_E2E is unset. eslint on the touched files: 0 errors.
Applied as-is. initLang and switchLang record a request counter before the first await and apply a pack only when that request is still the latest. Choosing the language already on screen cancels an in-flight load. A failed latest choice still saves the preference and leaves the previous UI.
Tests: node --test test/ui/lang.test.js test/ui/i18n.e2e.test.js test/i18n-packs.test.js test/i18n-server.test.js — 29 pass, 0 fail. The Chrome suite in test/ui/i18n.e2e.test.js skipped (SP_E2E unset).
Applied as-is. Clicking the operator already in the 自选 draft no longer rebuilds the draft from the saved pick or the default, so an in-progress skill or module edit stays. Choosing a different operator still loads that operator's saved pick or defaultPick.
Tests: node --test test/ui/diy-ui.test.js test/ui/feedback5-module-trait.test.js test/ui/diy.e2e.test.js — 25 pass, 0 fail. The diy.e2e suites skipped because SP_E2E is unset.
Applied as-is. A tab that is still choosing a reconnect token now answers another tab's query for the same candidate hashes, so a tab started during the 150 ms window cannot adopt a token the earlier tab is also considering. The smaller tab id still wins, and a tab that already holds the token keeps it.
Tests: node --test test/client-identity-session.test.js test/client-static.test.js — 319 pass, 0 fail.
- The 干员调配 overlay's capture-phase Esc closed the whole overlay while a 自选 picker was open (it only gave way to a
.modal; the picker is a .diy-pick section without its own key handling), so one Esc went back to the lobby.
- DiyPicker registers its own capture-phase Escape handler (calls onClose, as 取消 and the × do; skipped while a .modal
— the 导入 dialog — is open, which handles Esc first); loadout.js returns early on Escape while a .diy-pick is open.
The second Esc closes the overlay as before. Saved picks are untouched (the draft is dropped, as with 取消).
- test/ui/diy.e2e.test.js: a real-server browser test that needs no art (5阶 slot, then a 6阶 slot with Esc pressed in
the search field): the picker closes, the overlay and its four slots stay, sp.pref.diy is unchanged, the next Esc
closes the overlay. Fails on the parent (「Esc keeps the 干员调配 overlay」), passes here.
- Tests: SP_E2E=1 diy.e2e (the new test) 1 / 1; client-static, i18n, ui/diy*, ui/loadout* 369 / 369; eslint clean.
PRTS 卫戍协议/帮助 §装备: 「达到上限强行佩戴会改为替换装备：指定一件已佩戴装备替换为将要佩戴的装备，并销毁被指定的装备」,
no exception for the 装备时销毁 items. Before: a normal 博士投影 opened no dialog and its kept item pushed the OLDEST
equipped item out (replaceUid ignored); 盟约之币 and the other consumables kept both items.
- server PlayerState.equip (player/items.js): on a full carrier the consume path takes the pick (replaceUid, else the
oldest) off before onEquip (_takeReplaced), destroys it (onDestroy reason replace) once the effect went through —
the normal 博士投影 takes the freed slot —, and puts it back at its index when the effect refuses (博士投影 on an elite:
nothing destroyed)
- client gameLogic equipReplaces: the replace dialog opens for every item on a full carrier, consumables included,
except an attaching item that completes an item merge and a 博士投影 on an elite; itemAttaches removed
- bots (itemTarget): a consumable whose effect is the same on anyone goes to a carrier with a free slot first (PR #264)
- docs: design/match.md equipment rules, META §2.5, PLAYING 装备 row, research 04
golden (matches only; each traced equip by equip against the parent — the first change of state is a bot's, or the
AI 托管 human seat's, targeted consumable on a full carrier destroying its oldest item): solo-FUNNY-1 (r9 ai_0 随身身份牌),
solo-FUNNY-2 (r9 ai_0 寻呼模块), solo-HARD-2 (r9 ai_0 随身身份牌, r12 简易通讯机), coop2-NORMAL-3 (r9 ai_1 随身身份牌),
coop3-ABYSS-5 (r11 ai_1 随身身份牌), coop4-FUNNY-6 (r4 ai_1 随身身份牌), solo-HARD-9-boosted (r14 ai_0 随身身份牌),
coop2-ABYSS-10-boosted (r13 ai_0 随身身份牌, r14 ai_1 简易通讯机), coop2-NORMAL-14-standins (r9 ai_0 随身身份牌; now won,
14 rounds), coop2-NORMAL-70-diy (r14 h_0 随身身份牌); the bots' free-slot carrier for target-agnostic consumables moves
no scenario by itself; roster / bonds / fields / standins / diy unchanged
Seen (community report 「蕾缪安3技能范围里没人好像会自动结束」, relayed by the owner): with S3 locking, the locked enemy
killed or walking out of her range and nobody else in it, the skill ended at the next lock tick — the shells fell at
once and the bullets left were thrown away (repro on 0255afd: 3 of 5 bullets lost; a walker leaving her range, 1 lost).
Cause: chess_char_6_01-lemuen.js:169 `if (!e) { if (m.lemLocks.length) skill.end('ammo'); return; }`, there since the
initial import with no decision behind it.
Official: 「攻击装有5发弹药，打完后结束（可随时停止技能）」 — an ammo skill ends when its bullets are spent or the player
stops it; PRTS 卫戍协议/帮助 技能操作 「通常不会自动关闭技能」 (only 玛露希尔's 召唤使魔 is closed automatically); the client
(charpack char_4193_lemuen, buff_template_data lemuen_s_3): the S3 lock is an attack that needs a target and the skill
buff switches to the bombardment mode on ON_BUFF_FINISH only.
Now: with nothing to lock the skill waits (bullets and locks kept, the marks following their enemies or staying where
they left), its lock ready, so the next enemy in range (or 通缉) is locked on the next tick; it ends when the bullets are
spent and the shells fall on every mark in lock order as before. The S3 'lock' fx carry `hold`: render/fx/locks.js keeps
those reticles while the shooter's skill bit (UF.SKILL) is on and starts their LOCK_T at the skill's end (they faded 5 s
into a wait otherwise); S2's aim lock keeps its timeout.
Golden — traced on both trees (SkillRuntime start / end, the round's fields, the carried SP); in each the first
divergence is an S3 the parent ended with bullets left and nothing in her range:
- roster-018: the elite 蕾缪安's S3 of 7.63 s ended at 9.63 s with 2 of 6 bullets left; now the 6th goes at 12.00 s
(first differing snapshot window 0–10 s).
- boss-boss_3-pair: her S3 of 27.8 s ended at 30.3 s with 4 of 9 left; now all 9 by 34.43 s (window 30–40 s); the boss
now falls at 199.53 s instead of the 200 s cap.
- coop2-NORMAL-14-standins: ai_0's 蕾缪安 in round 11 ended S3 at 17.2 s (6 of 8 left) and 77.97 s (7 of 9); now she
spends them, enters the 联防 with 25.96 SP instead of 10.27, casts S3 there and kills one more of h_0's leaked enemies:
h_0 loses 1 LP less (rounds 11–12 LP 18 → 19, 8 → 9; lpLost 30 → 29; ai_0 kills +1).
bonds, standins, diy unchanged.
Tests: test/sim/feedback5-lemuen-s3-wait.test.js (3; the killed target and the walker who leaves fail on the parent),
test/render/fxproj.test.js +1 (a held lock waits while the skill bit is on; fails on the parent renderer).
Docs: CHANGELOG 0.2.0 规则（按官方）, docs/history/0.2.0.md §25.22.8 (also notes, unchanged: S2 spends a bullet on every
normal attack where PRTS says only the 通缉 snipe does — left to the owner).
Sukvii